How is nodularity evaluated?
Under the image analysis method in GB/T 9441-2021, nodularity is the area occupied by qualifying spheroidal graphite particles as a share of the total analyzed graphite area. The standard defines six classes. Set the acceptance threshold in the purchase specification. For example, a particular drawing might require at least 80% under the agreed method.
| Nodularity class | Nodularity (%) |
|---|---|
| 1 | ≥95 |
| 2 | 90–94 |
| 3 | 80–89 |
| 4 | 70–79 |
| 5 | 60–69 |
| 6 | 50–59 |
What else can metallography show?
The drawing may call for graphite shape and size, the matrix and its pearlite content, or carbides and phosphide eutectic where relevant. Casting geometry and sample location influence the result. Agree on the location when testing the casting itself. If using a coupon, identify which parts or batches it represents.
What to put in the drawing or technical agreement
Give the supplier and receiving inspector the same test method, acceptance criteria and reporting requirements.
- Test method · Agree on GB/T 9441-2021 or specify the relevant ISO 945-4 nodularity method or ASTM A247 visual classification method for graphite. State how results from the agreed method will be assessed.
- Acceptance threshold · State the class or minimum nodularity and any additional requirements for graphite size, pearlite or other constituents.
- Sampling location and frequency · Identify the agreed coupon or the location on the casting, and specify sampling by heat, lot or number of parts.
- Report and traceability · Specify whether a report and scaled micrographs are needed, and how each sample will be linked to its heat or lot.
GB/T 9441—2021 · ISO 945-4 · ASTM A247
In-house metallurgy at Wontide
Wontide can check nodularity, graphite shape and size, and matrix structure in-house, and provide metallographic reports as agreed. Its IATF 16949:2016 quality management system certificate covers manufacture of iron and steel castings.
RFQ checklist · See how to choose a ductile iron grade · Cast steel or ductile iron?